The Victron Energy GX Smart Shunt 1000A/50mV IP22 is an all in one battery monitor, only without a display. Your phone acts as the display.
The Smart Shunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the Smart Shunt can be connected and be read by a GX device, connected via a VE.Direct cable.
The Smart Shunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The Smart Shunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
Victron Energy GX Smart Shunt 1000A/50mV IP22 Specifications:
- Supply voltage range: 6.5 – 70 VDC
- Current draw: < 1mA
- Input voltage range: auxiliary battery 6.5 – 70 VDC
- Battery capacity: (Ah) 1 – 9999 Ah
- Operating temperature range: -40 +50°C (-40 – 120°F)
- IP22 Rated
- Measures voltage of second battery, or temperature, or midpoint: Yes
- Temperature measurement range: -20 +50°C
- VE.Direct communication port: Yes
$297.00
Excluded Tax
Brand : Victron Energy
Connectivity technology : HDMI
Connector type : MagSafe
Compatible devices : Cerbo GX
Compatible phone models : All
Included components : Victron Energy GX Touch 50, Display Screen for Cerbo GX (Waterproof)
Special feature : Waterproof
Colour : Multicolour
Input voltage : 240 Volts
Mounting type : Wall Mount
About Victron Energy GX Touch 50
- Five inch touch screen displays
- Immediate overview of your system
- Easy installation give you a lot of flexibility
- Building a clean and clean dashboard
- Simply connected to the Cerbo GX with a cable
The Victron Energy GX Touch 50 is the display accessory for our Cerbo GX. The five inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.
Watch the new video below that explains all there is to know about installing the new Cerbo GX & GX Touch 50.
Simply mounted
The GX Touch is optimized to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX ) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard.
The Victron Energy GX Touch 50 is a companion to the Cerbo GX, the all-new communication-Centre allows you to always have perfect control over your system from wherever you are and maximizes its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
$466.45
Excluded Tax
The Victron Energy GX Touch 70 is the display accessory for the Cerbo GX. The seven inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.
Watch the new video below that explains all there is to know about installing the new Cerbo GX & GX Touch 50 (same process for the GX Touch 70).
Simply mounted
The Victron Energy GX Touch 70 is optimized to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX ) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard.
The GX Touch 70 is a companion to the Cerbo GX, the all-new communication-Center allows you to always have perfect control over your system from wherever you are and maximizes its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 70, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
$682.95
Excluded Tax
Victron Energy IP67 12/25 Bluesmart Charger – Durable and safe
- Engineered to provide years of trouble-free and dependable operation in all usage conditions
- Protection against overheating: output current will be reduced if the charger temperature increases to 50°C
- Protection against short circuit: If a short circuit condition is detected the charger will immediately shut down
- Protection against reverse polarity connection: If the charger is incorrectly connected to a battery with reverse polarity the user replaceable fuse will blow (except for the 12/25 model, which has a non-replaceable internal fuse)
- Protection against ingress of dust and water/liquid
$353.45
Excluded Tax
Victron Energy SmartSolar MPPT 100/20_48V SmartSolar 12V,24V,48V 20A Solar Charge Controller MPPT Type SCC110020160R
Victron Energy ORION SmartSolar MPPT 100/20_48V with Bluetooth for 12-48v Systems – Lithium Compatible
Max. Solar Input 12v Battery System: 290w
Max. Solar Input 24v Battery System: 580w
Max. Solar Input 48v Battery System: 1160w
Max. Solar Currant: 20A
The Victron Energy ORION SmartSolar MPPT 100/20_48V uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged
- Ultra-fast Maximum Power Point Tracking (MPPT) : Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
- Advanced Maximum Power Point Detection in case of partial shading conditions : If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
- Internal temperature sensor : Compensates absorption and float charge voltage for temperature.
- Optional external battery voltage and temperature sensing via Bluetooth : A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
- Fully discharged battery recovery function : Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
- VE.Can: the multiple controller solution : Up to 25 units can be synchronized with VE.Can
- VE.Direct or VE.Can : For a wired data connection to a Color Control GX, other GX products, PC or other devices
- Remote on-off : To connect for example to a VE.BUS BMS.
- Programmable relay : Can be programmed to trip on an alarm, or other events.
- Outstanding conversion efficiency : No cooling fan. Maximum efficiency exceeds 98%.
- Flexible charge algorithm : Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
- Extensive electronic protection : Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
- Bluetooth Smart built-in : The wireless solution to set-up, monitor, update and synchronize SmartSolar Charge Controllers.
$295.95
Excluded Tax
Victron Energy SmartSolar MPPT 100/30 SmartSolar 12V/24V 30A Solar Charge Controller MPPT Type SCC110030210
Victron Energy ORION SmartSolar MPPT 100/30 Features:
- Maximum Power Point Tracking Solar Charge Controller
- Built-in Bluetooth for Ease of Programming & Monitoring
- 100V / 30A, Suitable for 12/24V Systems
- Internal Temperature Sensor
- Direct Communication Port for Wired Data Connection
- Over-Temperature Sensor
- Flexible Charge Algorithm
- Additional SmartSolar LCD Display Available
A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, Victron Energy ORION SmartSolar MPPT 100/30 maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
PWM and MPPT charge controllers are both widely used to charge batteries with solar power. The PWM controller is in essence a switch that connects a solar array to the battery. The result is that the voltage of the array will be pulled down to near that of the battery. The Victron Energy ORION SmartSolar MPPT controller is more sophisticated (and more expensive): it will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12V battery on one side of the MPPT charge controller and panels wired in series to produce 36 volts on the other.
It is generally accepted that MPPT will outperform PWM in a cold to temperate climate, while both controllers will show approximately the same performance in a subtropical to tropical climate. Besides performing the function of a basic controller, an MPPT controller also includes a DC to DC voltage converter, converting the voltage of the array to that required by the batteries, with very little loss of power.
An Victron Energy ORION SmartSolar MPPT controller attempts to harvest power from the array near its Maximum Power Point, whilst supplying the varying voltage requirements of the battery plus load. Thus, it essentially decouples the array and battery voltages, so that there can be a 12V battery on one side of the MPPT charge controller and two 12V panels wired in series to produce 36 volts on the other. If connected to a PV array with a substantially higher nominal voltage than the battery voltage, an MPPT controller will therefore provide charge current even at very high cell temperatures or in low irradiance conditions when a PWM controller would not help much.
As array size increases, both cabling cross-sectional area and cable length will increase. The option to wire more panels in series and thereby decrease current is a compelling reason to install an MPPT controller as soon as the array power exceeds a few hundred Watts (12V battery), or several 100 Watts (24V or 48V battery)
$370.45
Excluded Tax
Victron Energy ORION-Tr Smart 24/12-20A (240W) DC to DC Charger/Converter 20A Galvanic Isolated 16-35VDC Input to 10-15VDC Adjustable ORI241224120
Smart Power Solution: Orion-Tr 24/12-20A Isolated DC-DC Charger
The Victron Energy ORION- Tr SMART 24/12-20A Isolated DC-DC Charger is your go-to for reliable, efficient, and smart charging. It’s perfect for keeping your vehicle’s battery, RV, marine, or off-grid storage system in peak condition, ensuring you have power when you need it most.
Effortless Connectivity with Bluetooth Smart
Stay in control and customize your charger settings with the convenience of Bluetooth technology. Use any Bluetooth-enabled smartphone or tablet to keep track of your charger’s performance and make adjustments on the fly. With the latest software updates at your fingertips, your charger will always be up-to-date.
Customizable Charging for Every Need
- Adaptable charge settings allow you to tailor the charging process to your specific battery type and needs, whether you’re looking to optimize battery life or need a quick boost.
- Compatibility with modern smart alternators makes this charger an ideal choice for newer vehicles, ensuring seamless integration and charging.
Intelligent Charging with a 3-Stage Algorithm
- The Orion Smart charger’s bulk, absorption, and float stages adapt to your battery’s needs, offering a fast charge when empty and preventing overcharging when full.
- The fixed output voltage mode is also available for devices that need a constant power supply.
Remote Control Options
With the ability to connect a remote switch or relay, you have the flexibility to control the charger from afar, making it convenient for hard-to-reach installations or for integrating into complex systems.
Expandable Power for Larger Systems
Need more power? You can safely connect multiple units in parallel for increased current output, making it a scalable solution for larger energy demands.
Protection Against the Elements
With an IP43 protection rating when installed with the screw terminals facing downwards, the charger is protected against ingress of objects and spraying water, ensuring durability in various installation environments.
No-Hassle Installation
The user-friendly screw terminals mean no special tools are needed, simplifying the installation process. It’s a straightforward setup that’s as easy as it is robust.
Stay Safe with Built-In Features
Integrated safety features, including a non-replaceable input fuse and high-temperature protection, ensure your system is safeguarded against potential electrical issues.
Whether you’re powering an off-grid DC installation, hitting the road in your RV, or sailing the seas, the Victron Orion-Tr Smart Charger delivers the power you need with the intelligence and safety you can trust.
WARNING: This unit is specifically designed for 24V to 12V charging systems. Using it with other voltage systems may cause irreversible damage.
$352.95
Excluded Tax
Victron Energy ORION-Tr 24/12-30A (360W) DC to DC Converter 30A Galvanic Isolated 20-35VDC Input to 10-15VDC Adjustable ORI241240110
The Victron Energy ORION- Tr SMART 24/12-30A DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in cars, 4WDs or on boats where the ‘smart’ alternator and the start battery are used to charge the second/house battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Victron Energy ORION- Tr SMART 24/12-30A charger is suitable for both lead acid and lithium batteries. Unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C and rated to IP43.
Bluetooth Smart built-in
Any Bluetooth enabled Apple or Android smart phone, tablet or other device can be used to monitor, change settings and to update the charger when new software features become available via the VictronConnect App.
Smart alternator compatibility
Vehicle manufacturers are now introducing smart ECU (Engine Control Unit) controlled alternators to increase fuel efficiency and reduce emissions. Smart alternators deliver a variable output voltage and are shut down when they’re not needed. The converter has a engine running detection mechanism. This prevents the converter from discharging the starter battery when the alternator does not supply power. The Orion-Tr Smart Isolated DC-DC charger separates the starter battery from the service battery when the engine is not running.
Adaptive 3-stage charge algorithm: Bulk – Absorption – Float
- Bulk – During this stage the controller delivers as much charge current as possible to rapidly recharge the batteries.
- Absorption – When the battery voltage reaches the absorption voltage setting, the controller switches to constant voltage mode. For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. The fixed or adaptive mode can be chosen on the battery settings.
- Float – During this stage, float voltage is applied to the battery to maintain it in a fully charged state. When the battery voltage drops substantially below this level, due to a high load for example, during at least 1 minute, a new charge cycle will be triggered.
- Flexible charge algorithm – Programmable charge algorithm, and eight pre-programmed battery settings are configurable within the VictronConnect app.
Remote On-Off
Use the remote function to enable and disable the converter remotely with the remote on/off connector or using the VictronConnect app. Typical use cases include a user operated hard wired switch and automatic control by for example a Battery Management System.
Electronic Protection
- Over-temperature protection and power derating when temperature is high.
- Overload protected.
- Short circuit protected.
- Connector over-temperature protection.
Can be Paralleled to increase output current
An unlimited number of units can be connected in parallel to increase charging amps.
$568.45
Excluded Tax
A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, Victron Energy SmartSolar MPPT 100/20-48V maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. Victron Energy SmartSolar maintains battery health, extending its life.
PWM and MPPT charge controllers are both widely used to charge batteries with solar power. The PWM controller is in essence a switch that connects a solar array to the battery. The result is that the voltage of the array will be pulled down to near that of the battery. The MPPT controller is more sophisticated (and more expensive), it will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12V battery on one side of the MPPT charge controller and panels wired in series to produce 36 volts on the other.
It is generally accepted that MPPT will outperform PWM in a cold to temperate climate, while both controllers will show approximately the same performance in a subtropical to tropical climate. Besides performing the function of a basic controller, an MPPT controller also includes a DC to DC voltage converter, converting the voltage of the array to that required by the batteries, with very little loss of power.
An MPPT controller attempts to harvest power from the array near its Maximum Power Point, whilst supplying the varying voltage requirements of the battery plus load. Thus, it essentially decouples the array and battery voltages, so that there can be a 12V battery on one side of the MPPT charge controller and two 12V panels wired in series to produce 36 volts on the other. If connected to a PV array with a substantially higher nominal voltage than the battery voltage, an MPPT controller will therefore provide charge current even at very high cell temperatures or in low irradiance conditions when a PWM controller would not help much.
As array size increases, both cabling cross-sectional area and cable length will increase. The option to wire more panels in series and thereby decrease current is a compelling reason to install an MPPT controller as soon as the array power exceeds a few hundred Watts (12V battery), or several 100 Watts (24V or 48V battery)
Features:
- Maximum Power Point Tracking Solar Charge Controller
- Built-in Bluetooth for Ease of Programming & Monitoring
- 75V / 10A, Suitable for 12-48V Systems
- Internal Temperature Sensor
- Direct Communication Port for Wired Data Connection
- Over-Temperature Sensor
- Flexible Charge Algorithm
- Additional SmartSolar LCD Display Available
$295.95
Excluded Tax
