Victron MPPT 100/20/48V
$264.00
In Stock
Victron Energy SmartSolar MPPT 100/20_48V SmartSolar 12V,24V,48V 20A Solar Charge Controller MPPT Type SCC110020160R
Victron MPPT 100/20/48V controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron Energy MPPT 100/20/48V senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
Load output will prevent the battery from becoming totally flat [which can cause damage]. A preset discharge level can be configured at which point the SmartSolar will disconnect the load preventing the battery draining further.
Alternatively, the inbuilt intelligent battery management feature in the SmartSolar can be set. Known as Battery Life the feature is designed to protect and better maintain your battery by ensuring 100% recharge is regularly reached. SmartSolar attempts a daily 100% recharge. During periods of poor weather or low light conditions, it raises the disconnect voltage until successful.
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
Solar Gauge – Realtime power output
Battery Voltage
Battery Current
Battery State
Load Output [100/20 and smaller]
Load current – shows the current being drawn by appliances
History Analysis
Various Settings
In stock
Victron MPPT 100/20/48V
BlueSolar Charge Controllers MPPT 100/20 Up to 48V
- 12V/24/36/48V auto select battery voltage
- 20A rated charge current
- 290W @12V, 580W @24V or 1160W @ 48V maximum PV power
- Automatic load disconnect
- 98% peak efficiency
- Reverse polarity (fuse) protection, output short circuit protection and over temperature protection
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on our website for details
Programming, real-time data and history display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
| Weight | 0.65 kg |
|---|---|
| Dimensions | 6 × 11.3 × 10 cm |
| Categories | Solar Charge Controllers/Regulators |
| Description | BlueSolar 12V/24/36/48V 20A Solar Charge Controller MPPT Type SCC110020170R |
| Voltage | 12/24/36/48V |
| Size | 20A |
| Length | 6 |
| Width | 11.3 |
| Height | 10 |
Be the first to review “Victron MPPT 100/20/48V”
You must be logged in to post a review.
There are no reviews yet.