No products in the cart.
Victron Energy VPSINV-48/2000
$1,664.95
In Stock
Victron Energy VPSINV-48/2000 Multifunctional Power Management with Intelligent Features.
The Victron Energy VPSINV-48/2000 MultiPlus is not just an inverter/charger, it’s a comprehensive power management solution designed for high-demand commercial and industrial off-grid applications. This powerful unit integrates a true sine wave inverter, a sophisticated battery charger with adaptive charge technology, and a high-speed AC transfer switch into a single compact enclosure. Its versatility makes it ideal for a range of applications, ensuring reliability and efficiency in energy supply.
Key Features and Benefits:
Parallel Operation and Three-Phase Capability
- Enhanced Power Output: Up to six MultiPlus units can operate in parallel, delivering increased power for demanding setups.
- Three-Phase Output: Configure three units for balanced three-phase power, perfect for industrial applications.
PowerControl: Managing Limited Power Sources
- Smart Load Management: Set maximum generator or shore current to prevent overload, prioritizing charging and essential loads.
PowerAssist: Supplementing Power When Needed
- Boosting Capacity: Instantly compensates for insufficient shore or generator power, utilizing battery power for peak demands and recharging during low usage periods.
Advanced Charging Technologies
- Adaptive Charging: Four-stage charging process customizes the charge to battery condition, extending battery life.
- Dual Bank Charging: Charges a primary battery system and a secondary battery, such as a generator starter battery, simultaneously.
Additional Features for Enhanced Usability
- High Start-Up Power: Ideal for starting high inrush loads like power tools and lighting.
- Search Mode: Reduces power consumption by approximately 70% in no-load conditions, increasing efficiency.
- Programmable Relay & Remote Operations: Customizable settings and remote monitoring/control options for versatile use in remote locations.
Ideal for Applications in Commercial and Industrial Settings
- Off-grid energy systems in remote commercial and industrial locations.
- Backup power solutions for critical operations requiring high reliability.
- Energy management in facilities with fluctuating power demands or limited grid access.
Easy Configuration and Monitoring
- On-Site and Remote Configurations: Easily adjust settings with DIP switches, VE-Config, or the VE.Bus Smart dongle (not included).
- Remote Monitoring: Connect to the internet with a Cerbo GX or other GX product (not included) for access to Victron’s Remote Management (VRM) platform, allowing for comprehensive monitoring and control.
Enhancing Your Project’s Power Solutions with Victron MultiPlus
The Victron Energy VPSINV-48/2000 MultiPlus Inverter/Charger stands out as a robust, efficient, and versatile power solution for commercial and industrial off-grid applications. Its advanced features and customizable settings ensure optimal performance and reliability, making it an ideal choice for projects requiring dependable power management.
In stock
Victron Energy VPSINV-48/2000
Victron Energy VPSINV-48/2000 Phoenix Smart Inverter 37.2-68VDC input – output 240VAC@2000VA PIN242200000
48V 2000VA
Bluetooth built-in: fully configurable with a tablet or smartphone
• Low battery voltage alarm
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage: 210 – 245V
• Frequency: 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
• Alarm relay
Monitoring:
• In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable).
If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector.
Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch . The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Specifications
| Model | MultiPlus 48/2000/25 |
| PowerControl / PowerAssist | Yes |
| Three Phase and parallel operation | Yes |
| Transfer switch | 35 A |
| Inverter | |
| Input voltage range | 38– 66 V |
| Output | Output voltage: 230VAC ± 2% Frequency: 50Hz ± 0.1% (1) |
| Cont. output power at 25°C^{(3)} Cont. output power at 25°C | 2000 VA 1600 W |
| Cont. output power at 40°C | 1400 W |
| Cont. output power at 65°C | 1000 W |
| Peak power | 3500 W |
| Maximum efficiency | 95% |
| Zero-load power | 10 W |
| Zero-load power in search mode | 3 W |
| Charger | |
| AC Input | Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz |
| Charge voltage ‘absorption’ | 57.6 V |
| Charge voltage ‘float’ | 55.2 V |
| Storage mode | 52.8 V |
| Charge current house battery^{(4)} | 25 A |
| Battery temperature sensor | Yes |
| General | |
| Programmable relay | Yes |
| Protection (2) | a – g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| Remote on-off | |
| DIP switches | Yes^{(7)} |
| Internal DC fuse | no |
| Common Characteristics | Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95% |
| Enclosure | |
| Common Characteristics | Material & Colour: Steel/ABS (blue RAL 5012) Protection category: IP 21 Steel (RAL 5012), IP22 |
| Battery-connection | M8 bolts |
| 230V AC-connection | Screw |
| Weight | 15.5 kg |
| Dimensions (h x w x d) | 506 x 236 x 147 mm |
| Standards | |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 |
| Emission Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
| Automotive Directive | ECE R10-5 |
1)Adjustability
- Can be adjusted to 60Hz and to 240V.
2)Protection Features
- Output short circuit.
- Overload.
- Battery voltage too high.
- Battery voltage too low.
- Temperature too high.
- 230VAC on inverter output.
- Input voltage ripple too high.
3)Load Capacity
- Non-linear load, crest factor 3:1.
4)Operating Environment
- Up to 25°C ambient temperature.
5)Programmable Relay
- Can be set for general alarm, DC under voltage, or generator start/stop signal function.
AC rating: 230V/4A.
DC rating: 4A up to 35VDC, 1A up to 60VDC.
6)Control Options
- Remote control.
- Battery charge voltage adjustment.
- Inverter frequency adjustment.
- Search mode setting.
7)Battery and Inverter Settings
- Battery charge voltage adjustment.
- Search mode setting.
| Weight | 15.5 kg |
|---|---|
| Dimensions | 14.7 × 23.6 × 50.6 cm |
| Categories | Power Inverters |
| Description | Phoenix Smart Inverter 37.2-68VDC input – output 240VAC@2000VA PIN242200000 |
| Voltage | 48V |
| Depth | 14.7 |
| Width | 23.6 |
| Height | 50.6 |
Be the first to review “Victron Energy VPSINV-48/2000”
You must be logged in to post a review.
There are no reviews yet.