Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can
$1,696.45
In Stock
Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Features:
- With no cooling fan the maximum efficiency exceeds 98% for outstanding conversion efficiency
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
- Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth – Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Extensive electronic protection:
- Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high
- PV short circuit and PV reverse polarity protection
- PV reverse current protection
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
Optional SmartSolar pluggable LCD display
An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
In stock
Categories:
Solar ControllersSKU:
SCC115110511Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can
Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can 12V/24V/36V/48V 100A MC4 VE.Can Smart Solar Charge Controller MPPT Type SCC115110511
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronize SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions.
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Direct
For a wired data connection to a Colour Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
| Weight | 4.5 kg |
|---|---|
| Dimensions | 10.3 × 29.5 × 24.6 cm |
| Categories | Solar Charge Controllers/Regulators |
| Description | 12V/24V/36V/48V 100A MC4 VE.Can Smart Solar Charge Controller MPPT Type SCC115110511 |
| Voltage | 12/24/36/48V |
| Size | 100A |
| Length | 10.3 |
| Width | 29.5 |
| Height | 24.6 |
Be the first to review “Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can”
You must be logged in to post a review.
There are no reviews yet.