Victron Energy GX Smart Shunt 1000A/50mV IP22
$297.00
In Stock
The Victron Energy GX Smart Shunt 1000A/50mV IP22 is an all in one battery monitor, only without a display. Your phone acts as the display.
The Smart Shunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the Smart Shunt can be connected and be read by a GX device, connected via a VE.Direct cable.
The Smart Shunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The Smart Shunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
Victron Energy GX Smart Shunt 1000A/50mV IP22 Specifications:
- Supply voltage range: 6.5 – 70 VDC
- Current draw: < 1mA
- Input voltage range: auxiliary battery 6.5 – 70 VDC
- Battery capacity: (Ah) 1 – 9999 Ah
- Operating temperature range: -40 +50°C (-40 – 120°F)
- IP22 Rated
- Measures voltage of second battery, or temperature, or midpoint: Yes
- Temperature measurement range: -20 +50°C
- VE.Direct communication port: Yes
In stock
Victron Energy GX Smart Shunt 1000A/50mV IP22
The Victron Energy GX Smart Shunt 1000A/50mV IP22 is a powerful battery monitor with Bluetooth on board. It can be installed out of sight, behind the scenes – whilst live data from the device is relayed to your mobile phone or tablet via the VictronConnect App for Android or iOS or on your Mac and PC. The Victron Energy GX Smart Shunt 1000A/50mV IP22 is a great alternative for a BMV battery monitor where a separate display isn’t required.
Monitored Battery Parameters include:
- Battery State-of-Charge (SoC)
- Voltage of up to 2 batteries
- Current Load
- Time to go
- Extensive historical information
Auxiliary Input Options:
The Smart Shunt can do more than comprehensively monitor your main battery bank – additionally you can choose to either:
- Monitor the voltage of a second battery, for example the starter battery or
- Connect a temperature sensor (optional accessory) for temperature compensated charging or
- Monitor the midpoint voltage of your battery bank (cable included) to keep an eye on battery health.
Connection to any Victron GX Device
The Smart Shunt also features a VE.Direct port so can also be connected to any device in the GX range including the Colour Controller and Cerbo GX via a VE.Direct cable.
Differences compared to BMV-712 Battery Monitor
- No programmable visual and audible alarm
- No programmable relay.
Weight | 1.0100 kg |
---|---|
Dimensions | 8 × 18 × 8 cm |
Description | Smart Shunt 1000A/50mV Battery Monitor |
SmartShunt | 1000A |
Supply voltage range | 6,5 – 70 VDC |
Current draw | < 1mA |
Input voltage range, auxiliary battery | 6,5 – 70 VDC |
Battery capacity (Ah) | 1 – 9999 Ah |
Operating temperature range | -40 +50°C (-40 – 120°F) |
Measures voltage of second battery, or temperature, or midpoint | Yes |
Temperature measurement range | -20 +50°C |
VE.Direct communication port | Yes |
RESOLUTION & ACCURACY | – |
Current | ± 0,1A |
Voltage | ± 0,01V |
Amp hours | ± 0,1 Ah |
State of charge (0 – 100%) | ± 0,1% |
Time to go | ± 1 min |
Temperature (0 - 50°C or 30 - 120°F) | ± 1°C/°F |
Accuracy of current measurement | ± 0,4% |
Offset | Less than 20 / 40 / 80 mA |
Accuracy of voltage measurement | ± 0,3% |
INSTALLATION & DIMENSIONS | – |
Protection category | IP21 |
Length | 5.4 |
Width | 12 |
Height | 6.8 |
STANDARDS | – |
Safety | EN 60335-1 |
Emission / Immunity | EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3 |
Automotive | EN 50498 |
Cables (included) | Two cables with fuse, for ‘+’ connection and starter battery or midpoint connection |
Temperature sensor | Optional (ASS000100000) |
Be the first to review “Victron Energy GX Smart Shunt 1000A/50mV IP22”
You must be logged in to post a review.
There are no reviews yet.