No products in the cart.
Enecharger ICS1 Battery Guardian – 6V/12V 1.0A 7 Step automatic SLA battery charger comes with alligator clips and ring terminal connectors. Features: 7 step charging method for 6V/12V Lead Acid, VRLA, Wet, Gel, maintenance free and AGM batteries Automatic voltage detection and automatic shut off Charges batteries from 4Ah up to 20Ah Maintains batteries up to 100Ah Reverse polarity protection and spark proof LED status indication SMPS technology Specifications: AC Input Rating: 100-240VAC 50/60Hz DC Output Rating: 6VDC / 12VDC @ 1.0A Low Voltage Threshold 4V(6V)/7.5V(12V) Output Termination: Constar for easy connection with either of included cables – BFL1 alligator clips or BFL2 ring terminals Operating Temperature: -10oC to +45oC IP20 rated
$56.95
Excluded Tax
Enecharger ICS1-F1 Battery Guardian – 6V/12V 1.0A 7 Step automatic SLA battery charger comes with 4.8mm spade terminal connector. Features: 7 step charging method for 6V/12V Lead Acid, VRLA, Wet, Gel, maintenance free and AGM batteries Automatic voltage detection and automatic shut off Charges batteries from 4Ah up to 20Ah Maintains batteries up to 100Ah Reverse polarity protection and spark proof LED status indication SMPS technology Specifications: AC Input Rating: 100-240VAC 50/60Hz DC Output Rating: 6VDC / 12VDC @ 1.0A Low Voltage Threshold 4V(6V)/7.5V(12V) Output Termination: Constar for easy connection with included 4.8mm spade terminal connector cable Operating Temperature: -10oC to +45oC IP20 rated
$56.95
Excluded Tax
Enecharger ICS1-F2 Battery Guardian – 6V/12V 1.0A 7 Step automatic SLA battery charger comes with 6.35mm spade terminal connector. Features: 7 step charging method for 6V/12V Lead Acid, VRLA, Wet, Gel, maintenance free and AGM batteries Automatic voltage detection and automatic shut off Charges batteries from 4Ah up to 20Ah Maintains batteries up to 100Ah Reverse polarity protection and spark proof LED status indication SMPS technology Specifications: AC Input Rating: 100-240VAC 50/60Hz DC Output Rating: 6VDC / 12VDC @ 1.0A Low Voltage Threshold 4V(6V)/7.5V(12V) Output Termination: Constar for easy connection with included 6.35mm spade terminal connector cable Operating Temperature: -10oC to +45oC IP20 rated
$56.95
Excluded Tax
Enecharger ICS1.5LF Battery Guardian – 6V/12V 1.5A 6 Step Fully Automatic LiFePO4 battery charger with BFL2 & BFL6 Leads Features: 6 step charging program for 6V/12V Lithium Iron Phosphate batteries Automatic voltage detection and automatic shut off Charges batteries from 1.5Ah up to 30Ah Maintains batteries up to 60Ah Reverse polarity protection and spark proof LED status indication Specifications: AC Input Rating: 100-240VAC 50/60Hz DC Output Rating: 6VDC / 12VDC @ 1.5A Low Voltage Detection 4V(6V)/7.5V(12V) Output Termination: Constar for easy connection with either of included cables – BFL2 ring terminals & BFL6 spade terminals Operating Temperature: -10oC to +45oC IP20 rated
$65.45
Excluded Tax
Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in our AC mains ePOWER battery charger.GEL, AGM, Flooded, Lithium and the ability to create a full custom profile Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W 40A+ output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included with charger for more accurate battery charging The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads. Multistage Charging Process The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries. The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array. As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages. Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply. Smart Charging Feature The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so. Battery Temperature Sensor Included standard with all ePOWER Battery Chargers.
$638.00
Excluded Tax
20A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. Multistage Charging Process The Enerdrive ePOWER 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 20A battery charger delivers four primary charge stages:- Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply. Stage 4 – Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life. 1 PRIORITY – Charge Where You Need it Most The ePOWER 20A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 & 3 batteries. The priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks. In the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1. All About Lithium The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements. The Display Panel The ePOWER 20A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float / power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode. Silence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on & full output’ setting.
$462.00
Excluded Tax
40A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. Multistage Charging Process The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 40A battery charger delivers four primary charge stages:- Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply. Stage 4 – Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life. 1 PRIORITY – Charge Where You Need it Most The ePOWER 40A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 & 3 batteries. The priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks. In the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1. All About Lithium The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements. The Display Panel The ePOWER 40A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float / power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode. Silence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on & full output’ setting.
$565.00
Excluded Tax
60A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 60A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. Multistage Charging Process The Enerdrive ePOWER 60A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 60A battery charger delivers four primary charge stages:- Stage 1 – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply. Stage 4 – Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive ePOWER Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life. 1 PRIORITY – Charge Where You Need it Most The ePOWER 60A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 & 3 batteries. The priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks. In the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1. All About Lithium The recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current / constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the ePOWER charger algorithm perfectly supporting Lithium battery requirements. The Display Panel The ePOWER 60A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float / power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode. Silence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on & full output’ setting.
$792.00
Excluded Tax
The new and improved Charge N Maintain is perfectly suited to the DIYer. No fuss options mean you can simply hook them up and the charger will do the rest. Projecta Charge N Maintain range offers a safe and practical method for charging all your automotive and marine batteries. Projecta Charge N Maintain Chargers are smart Chargers. This technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time. Projecta Charge N Maintain Smart Chargers communicate with the battery and ascertain its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity. Fully Automatic Simply connect and forget, no risk of overcharging, maintains battery ready for use Safe & Simple Spark-free and polarity protected, safe to use while the battery is still in the vehicle Fused Wiring Harness Quick-connect fused wiring harness for permanent installation (BCWH)
$59.00
Excluded Tax
The new and improved Charge N Maintain is perfectly suited to the DIYer. No fuss options mean you can simply hook them up and the charger will do the rest. Projecta Charge N Maintain range offers a safe and practical method for charging all your automotive and marine batteries. Projecta Charge N Maintain Chargers are smart Chargers. This technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time. Projecta Charge N Maintain Smart Chargers communicate with the battery and ascertain its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity. Safe & Simple Spark-free and polarity protected, safe to use while the battery is still in the vehicle Fused Wiring Harness Quick-connect fused wiring harness for permanent installation (BCWH) Fully Automatic Simply connect and forget, no risk of overcharging, maintains battery ready for use Mounting Bracket Also included in the kit is a mounting bracket for easy permanent installation and an extensions cord for easy operation
$70.00
Excluded Tax
Ideal for the home professional wanting a charger for a range of charging applications, eg. motorbike, jet ski, small passenger vehicles.
$99.00
Excluded Tax
The new and improved Charge N Maintain is perfectly suited to the DIYer. No fuss options mean you can simply hook them up and the charger will do the rest. Projecta Charge N Maintain range offers a safe and practical method for charging all your automotive and marine batteries. Projecta Charge N Maintain Chargers are mart Chargers. This technology offers switchable charging stages that ensure an accurate and efficient charge for your battery. This allows longer life and better performance for your battery over extended periods of time. Projecta Charge N Maintain Smart Chargers communicate with the battery and ascertain its level of charge. This allows the charger to balance its load and optimise its charging methods to ensure charging is stopped when the battery reaches capacity. Fully Automatic Fully automatic and spark free, simply connect and forget Safe & Easy Short circuit and polarity protected, safe to use while the battery is still in the vehicle Adjustable Output Adjustable to suit different battery sizes for optimum charging Fused Wiring Harness Quick-connect fused wiring harness for permanent installation (BCWH)
$140.00
Excluded Tax
Bluetooth inside With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. Download the Victron Bluetooth app Use a smartphone or other Bluetooth enabled device to customise settings monitor all important data on single screen view historical data, and to update the software when new features become available. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Midpoint voltage monitoring One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. Very low current draw from the battery Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days. Bi-stable alarm relay Prevents increased current draw in case of an alarm. Other features Battery voltage, current, power, ampere-hours consumed and state of charge Remaining time at the current rate of discharge Programmable visual and audible alarm Programmable relay, to turn off non critical loads or to run a generator when needed 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.000 Amps VE.Direct communication port Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 6,5 – 70V High current measurement resolution: 10 mA (0,01A) Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings
$423.50
Excluded Tax
Bluetooth setup and monitoring (Using VictronConnect) Easily setup, monitor or update the charger firmware using the VictronConnect app and a Bluetooth enabled device (such as a mobile phone or tablet). Multi-stage charge algorithm The multi-stage charge algorithm is specifically engineered to optimise each recharge cycle and charge maintenance over extended periods. Adaptive absorption Adaptive absorption monitors the battery’s response during initial charging and intelligently determines the appropriate absorption duration for each individual charge cycle. This ensures that the battery is fully recharged regardless of the discharge level or capacity and avoids excessive time at the elevated absorption voltage (that can accelerate battery aging). Temperature compensation Charge voltage is automatically compensated depending on the ambient temperate; this ensures that the battery is charged at the optimal charge voltage regardless of the climate and avoids the need for manual settings adjustments. Temperature compensation is not required and automatically disabled when in LI-ION charge mode. High efficiency The blue smart charger range is up to ~95% efficient; resulting in lower power usage, less heat generated and cooler operation. Durable and safe Engineered to provide years of trouble-free and dependable operation in all usage conditions Protection against overheating: output current will be reduced if the charger temperature increases to 50°C Protection against short circuit: If a short circuit condition is detected the charger will immediately shut down Protection against reverse polarity connection: If the charger is incorrectly connected to a battery with reverse polarity the user replaceable fuse will blow (except for the 12/25 model, which has a non-replaceable internal fuse) Protection against ingress of dust and water/liquid Silent operation Charger operation is totally silent: there is no cooling fan or moving parts. Lithium Ion compatible Compatible with Li-ion (LiFePO₄) batteries; when the integrated LI-ION charge mode is selected the charge cycle settings are altered to suit. If the charger is connected to a battery where under voltage protection (UVP) has tripped, the blue smart charger range will automatically reset UVP and start charging; many other chargers will not recognise a battery in this state. Warning: Never charge a Li-ion battery when its temperature is below 0°C. Storage stage An additional stage to extend battery life whilst the battery is unused and on continuous charge. Recondition stage An optional stage that can partially recover/reverse lead acid battery degradation due to sulfation; typically caused by inadequate charging or if the battery is left in a deeply discharged state. Low current mode An optional mode that limits the maximum charge current to a significantly reduced level; recommended when charging lower capacity batteries with a high current charger. Recovery function The blue smart charger range will attempt to recharge a severely discharged battery (even down to 0V) with low current and then resume normal charging once the battery voltage has risen sufficiently – many other chargers will not recognise a battery in this state. Power supply mode A specific mode to use the charger as a DC power supply; to power equipment at a constant voltage with or without a battery connected.
$353.45
Excluded Tax17% Off
The Blue Smart IP65 Power Sports Charger is the new professional battery charger & maintainer designed for use with Motorcycles, Personal Watercraft and similar smaller battery applications. This fully Bluetooth and App* controlled charger provides the ultimate in monitoring and control, all from the palm of your hand – simply pair your smart phone or smart device to access the charger. Featuring: Plug & Play functionality designed for the recreational or infrequent use of Motorcycle, PWC and other smaller battery applications. IP65 rated Water, dust and chemical resistant case Seven step smart charge algorithm to extend battery service life Automatically detects battery voltage and applies appropriate charge profile – 6V & 12V 1.1A output to charge up to 30Ah capacity, or maintain up to 60Ah capacity batteries Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Iron Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low power mode to provide 500mA current to charge smaller batteries Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Reverse Polarity, Short Circuit & Over Temperature protection to ensure safe operation May also be used as a power supply. Power supply mode is available via the VictronConnect app Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. (* battery voltage should be manually set in VictronConnect to ensure batteries are charged to the correct end voltage) Easy Battery Connection: The charger comes with Alligator clips, M8 eyelets (for mounting to batteries in difficult to reach spots), and a handy Cigarette lighter plug with adaptible power port plug for use with the latest European motocycles. All designed to make it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the real-time status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. LED Indication: Very simple visual representation of battery chager mode. Green light for 12V charging, Orange light for 6V charging, and Red light warning for reverse polarity connection.
$118.95 Original price was: $118.95.$99.00Current price is: $99.00.
Bluetooth inside With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. Download the Victron Bluetooth app Use a smartphone or other Bluetooth enabled device to customise settings monitor all important data on single screen view historical data, and to update the software when new features become available. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Midpoint voltage monitoring One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. Very low current draw from the battery Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days. Bi-stable alarm relay Prevents increased current draw in case of an alarm. Other features Battery voltage, current, power, ampere-hours consumed and state of charge Remaining time at the current rate of discharge Programmable visual and audible alarm Programmable relay, to turn off non critical loads or to run a generator when needed 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.000 Amps VE.Direct communication port Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 6,5 – 70V High current measurement resolution: 10 mA (0,01A) Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings
$423.50
Excluded Tax
Orion-Tr Smart DC-DC Charger Isolated The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines) The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details)
$352.95
Excluded Tax
Replaces previous model ORI481236100 Orion-Tr range of DC to DC Galvanic Isolated Converters Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable) On 12V and 24V input models only.
$568.45
Excluded Tax
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$275.00
Excluded Tax
The Blue Smart IP65s Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$149.00
Excluded Tax10% Off
The Blue Smart IP65s Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$165.00 Original price was: $165.00.$149.00Current price is: $149.00.
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$220.00
Excluded Tax
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: Victron Connect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$407.00
Excluded Tax
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$231.00
Excluded Tax
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: Victron Connect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$306.00
Excluded Tax
The XLR 3-pin connector with fuse is an accessory of the Blue Power & Blue Smart IP65 Charger with DC connector. Positive = RED, Negative = BLACK. Suitable for use with mobility aids and scooters. The XLR 3-pin connector has a current rating of 16 Amps.
$34.10
Excluded Tax
Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Victron Connect: Victron connect lets you program, as well as get live status and historical information from Victron products with built-in blue tooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Safe: Reverse Polarity, Over Temperature & Short Circuit protections Operating Temp Range: -20 to +60 deg celcius
$240.00
Excluded Tax
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Featuring: Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries. User definable “Expert Mode” to alter presets to suit battery manufacturer technical specifications. Low thermal stress on electrical components for longterm reliability Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection Setup and configure, readout of voltage and current by Bluetooth Smart View indepth historical charge – cycle history for the connected battery. Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Smart 7 step charging program: The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance …and a longer life. These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm. Deep Discharge Recovery: Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Easy Battery Connection: The charger comes with both Alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Remote Monitoring: The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Victron Connect: Victron Connect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. The MODE Button: You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly. For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds…
$407.00
Excluded Tax
Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. May also be used as a power supply. Power supply mode is available via the BluetoothSmart app. Victron Connect: Victron connect lets you program, as well as get live status and historical information from Victron products with built-in blue tooth support or by using a VE.Direct Bluetooth Smart dongle. History File: View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Safe: Reverse Polarity, Over Temperature & Short Circuit protections Operating Temp Range: -20 to +60 deg celcius
$210.45
Excluded Tax
