Victron Energy ORION-Tr Smart 24/12-20A (240W) DC to DC Charger/Converter 20A Galvanic Isolated 16-35VDC Input to 10-15VDC Adjustable ORI241224120
Smart Power Solution: Orion-Tr 24/12-20A Isolated DC-DC Charger
The Victron Energy ORION- Tr SMART 24/12-20A Isolated DC-DC Charger is your go-to for reliable, efficient, and smart charging. It’s perfect for keeping your vehicle’s battery, RV, marine, or off-grid storage system in peak condition, ensuring you have power when you need it most.
Effortless Connectivity with Bluetooth Smart
Stay in control and customize your charger settings with the convenience of Bluetooth technology. Use any Bluetooth-enabled smartphone or tablet to keep track of your charger’s performance and make adjustments on the fly. With the latest software updates at your fingertips, your charger will always be up-to-date.
Customizable Charging for Every Need
- Adaptable charge settings allow you to tailor the charging process to your specific battery type and needs, whether you’re looking to optimize battery life or need a quick boost.
- Compatibility with modern smart alternators makes this charger an ideal choice for newer vehicles, ensuring seamless integration and charging.
Intelligent Charging with a 3-Stage Algorithm
- The Orion Smart charger’s bulk, absorption, and float stages adapt to your battery’s needs, offering a fast charge when empty and preventing overcharging when full.
- The fixed output voltage mode is also available for devices that need a constant power supply.
Remote Control Options
With the ability to connect a remote switch or relay, you have the flexibility to control the charger from afar, making it convenient for hard-to-reach installations or for integrating into complex systems.
Expandable Power for Larger Systems
Need more power? You can safely connect multiple units in parallel for increased current output, making it a scalable solution for larger energy demands.
Protection Against the Elements
With an IP43 protection rating when installed with the screw terminals facing downwards, the charger is protected against ingress of objects and spraying water, ensuring durability in various installation environments.
No-Hassle Installation
The user-friendly screw terminals mean no special tools are needed, simplifying the installation process. It’s a straightforward setup that’s as easy as it is robust.
Stay Safe with Built-In Features
Integrated safety features, including a non-replaceable input fuse and high-temperature protection, ensure your system is safeguarded against potential electrical issues.
Whether you’re powering an off-grid DC installation, hitting the road in your RV, or sailing the seas, the Victron Orion-Tr Smart Charger delivers the power you need with the intelligence and safety you can trust.
WARNING: This unit is specifically designed for 24V to 12V charging systems. Using it with other voltage systems may cause irreversible damage.
$352.95
Excluded Tax
Victron Energy ORION-Tr 24/12-30A (360W) DC to DC Converter 30A Galvanic Isolated 20-35VDC Input to 10-15VDC Adjustable ORI241240110
The Victron Energy ORION- Tr SMART 24/12-30A DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in cars, 4WDs or on boats where the ‘smart’ alternator and the start battery are used to charge the second/house battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Victron Energy ORION- Tr SMART 24/12-30A charger is suitable for both lead acid and lithium batteries. Unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C and rated to IP43.
Bluetooth Smart built-in
Any Bluetooth enabled Apple or Android smart phone, tablet or other device can be used to monitor, change settings and to update the charger when new software features become available via the VictronConnect App.
Smart alternator compatibility
Vehicle manufacturers are now introducing smart ECU (Engine Control Unit) controlled alternators to increase fuel efficiency and reduce emissions. Smart alternators deliver a variable output voltage and are shut down when they’re not needed. The converter has a engine running detection mechanism. This prevents the converter from discharging the starter battery when the alternator does not supply power. The Orion-Tr Smart Isolated DC-DC charger separates the starter battery from the service battery when the engine is not running.
Adaptive 3-stage charge algorithm: Bulk – Absorption – Float
- Bulk – During this stage the controller delivers as much charge current as possible to rapidly recharge the batteries.
- Absorption – When the battery voltage reaches the absorption voltage setting, the controller switches to constant voltage mode. For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. The fixed or adaptive mode can be chosen on the battery settings.
- Float – During this stage, float voltage is applied to the battery to maintain it in a fully charged state. When the battery voltage drops substantially below this level, due to a high load for example, during at least 1 minute, a new charge cycle will be triggered.
- Flexible charge algorithm – Programmable charge algorithm, and eight pre-programmed battery settings are configurable within the VictronConnect app.
Remote On-Off
Use the remote function to enable and disable the converter remotely with the remote on/off connector or using the VictronConnect app. Typical use cases include a user operated hard wired switch and automatic control by for example a Battery Management System.
Electronic Protection
- Over-temperature protection and power derating when temperature is high.
- Overload protected.
- Short circuit protected.
- Connector over-temperature protection.
Can be Paralleled to increase output current
An unlimited number of units can be connected in parallel to increase charging amps.
$568.45
Excluded Tax
A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, Victron Energy SmartSolar MPPT 100/20-48V maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. Victron Energy SmartSolar maintains battery health, extending its life.
PWM and MPPT charge controllers are both widely used to charge batteries with solar power. The PWM controller is in essence a switch that connects a solar array to the battery. The result is that the voltage of the array will be pulled down to near that of the battery. The MPPT controller is more sophisticated (and more expensive), it will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12V battery on one side of the MPPT charge controller and panels wired in series to produce 36 volts on the other.
It is generally accepted that MPPT will outperform PWM in a cold to temperate climate, while both controllers will show approximately the same performance in a subtropical to tropical climate. Besides performing the function of a basic controller, an MPPT controller also includes a DC to DC voltage converter, converting the voltage of the array to that required by the batteries, with very little loss of power.
An MPPT controller attempts to harvest power from the array near its Maximum Power Point, whilst supplying the varying voltage requirements of the battery plus load. Thus, it essentially decouples the array and battery voltages, so that there can be a 12V battery on one side of the MPPT charge controller and two 12V panels wired in series to produce 36 volts on the other. If connected to a PV array with a substantially higher nominal voltage than the battery voltage, an MPPT controller will therefore provide charge current even at very high cell temperatures or in low irradiance conditions when a PWM controller would not help much.
As array size increases, both cabling cross-sectional area and cable length will increase. The option to wire more panels in series and thereby decrease current is a compelling reason to install an MPPT controller as soon as the array power exceeds a few hundred Watts (12V battery), or several 100 Watts (24V or 48V battery)
Features:
- Maximum Power Point Tracking Solar Charge Controller
- Built-in Bluetooth for Ease of Programming & Monitoring
- 75V / 10A, Suitable for 12-48V Systems
- Internal Temperature Sensor
- Direct Communication Port for Wired Data Connection
- Over-Temperature Sensor
- Flexible Charge Algorithm
- Additional SmartSolar LCD Display Available
$295.95
Excluded Tax
A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, Victron Energy SmartSolar MPPT 100/50 maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. Victron Energy SmartSolar MPPT 100/50 maintains battery health, extending its life.
PWM and MPPT charge controllers are both widely used to charge batteries with solar power. The PWM controller is in essence a switch that connects a solar array to the battery. The result is that the voltage of the array will be pulled down to near that of the battery. The MPPT controller is more sophisticated (and more expensive), it will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12V battery on one side of the MPPT charge controller and panels wired in series to produce 36 volts on the other.
It is generally accepted that MPPT will outperform PWM in a cold to temperate climate, while both controllers will show approximately the same performance in a subtropical to tropical climate. Besides performing the function of a basic controller, an MPPT controller also includes a DC to DC voltage converter, converting the voltage of the array to that required by the batteries, with very little loss of power.
An MPPT controller attempts to harvest power from the array near its Maximum Power Point, whilst supplying the varying voltage requirements of the battery plus load. Thus, it essentially decouples the array and battery voltages, so that there can be a 12V battery on one side of the MPPT charge controller and two 12V panels wired in series to produce 36 volts on the other. If connected to a PV array with a substantially higher nominal voltage than the battery voltage, an MPPT controller will therefore provide charge current even at very high cell temperatures or in low irradiance conditions when a PWM controller would not help much.
As array size increases, both cabling cross-sectional area and cable length will increase. The option to wire more panels in series and thereby decrease current is a compelling reason to install an MPPT controller as soon as the array power exceeds a few hundred Watts (12V battery), or several 100 Watts (24V or 48V battery)
Features:
- Maximum Power Point Tracking Solar Charge Controller
- Built-in Bluetooth for Ease of Programming & Monitoring
- 100V / 50A, Suitable for 12/24V Systems
- Internal Temperature Sensor
- Direct Communication Port for Wired Data Connection
- Over-Temperature Sensor
- Flexible Charge Algorithm
- Additional SmartSolar LCD Display Available
$610.45
Excluded Tax
Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron Energy SmartSolar MPPT 150/100-MC4 VE.Can support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Features:
- With no cooling fan the maximum efficiency exceeds 98% for outstanding conversion efficiency
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
- Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth – Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Extensive electronic protection:
- Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high
- PV short circuit and PV reverse polarity protection
- PV reverse current protection
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
Optional SmartSolar pluggable LCD display
An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
$1,696.45
Excluded Tax
Brand : Victron Energy
Voltage : 150 Volts
Manufacturer : Victron Energy
About Victron Energy SmartSolar MPPT 150/100A-Tr 12/24V :
Ultra-fast maximum power point tracking
Advanced maximum power point Detection in case of partial shading conditions
Maintains battery health, extending its life
Easy to install and convenient
Features:
- Maximum Power Point Tracking (MPPT) Technology: Advanced MPPT technology maximizes the energy harvest from your solar panels, ensuring optimal performance in varying weather conditions and shading.
- Wide Input Voltage Range: Compatible with 12V, 24V, and 48V battery systems, offering versatility for different applications and setups.
- High Charging Capacity: With a maximum charging current of 36A, this charge controller efficiently manages the charging process, delivering faster charging times for your batteries.
- Flexible Installation Options: Compact and lightweight design allows for easy installation, whether it’s on a wall, pole, or any suitable surface, making it ideal for both residential and commercial installations.
- Bluetooth Connectivity: Monitor and configure the charge controller remotely via Bluetooth using the VictronConnect app, providing real-time insights into system performance and settings adjustment convenience.
- Intelligent Battery Management: Built-in battery temperature sensor ensures safe charging by adjusting the charging voltage according to the battery temperature, prolonging battery life and reliability.
- Robust Construction: Designed to withstand harsh environmental conditions, the BlueSolar charge controller features a durable and weather-resistant enclosure, ensuring long-term performance even in challenging outdoor environments.
Technical Specifications:
- Input Voltage: 12V/24V/48V (Automatic recognition)
- Maximum Charging Current: 36A
- Maximum PV Input Voltage: 150V
- Maximum PV Input Power: 500W (12V), 1000W (24V), 2000W (48V)
- Battery Types: Sealed, Gel, Flooded
- Communication: Bluetooth (VictronConnect app)
- Protection: Overload, Short Circuit, Over-temperature, Reverse Polarity
$1,065.95
Excluded Tax
Victron Energy SmartSolar MPPT 250/100A-MC4 VE.Can offers a comprehensive range of MPPT solar controllers tailored to suit various system configurations. Our SmartSolar MPPT controllers provide exceptional performance and offer unparalleled convenience through remote monitoring and control using the user-friendly VictronConnect app. In addition, with our adaptive battery management feature, you can extend the lifespan of your batteries, ensuring long-term reliability for your solar power system.
Victron understands that every solar system has unique requirements. So whether you have a small-scale 12V or 24V system or you require higher power capacities for 36V or 48V systems, Victron has the perfect MPPT controller for you.
The 75/10 and 75/15 MPPT controllers are ideal for 12V and 24V systems utilizing either low-cost “house panels” or smaller “12V panels.” These controllers can handle up to 3 “12-volt” style panels connected in series, providing efficient power conversion for your setup.
For higher power requirements, the 100V and 150V models are designed to accommodate 12V, 24V, 36V, and 48V systems.
Specifications:
Brand: Victron Energy
Model: SmartSolar MPPT 250/70-MC4 VE. Can
Battery voltage: 12/24/36/48V
Charge current: 70A
Nominal PV power:
– 12V: 1000W
– 24V: 2000W
– 36V: 3000W
– 48V: 4000W
IP rating IP43
PV open circuit voltage: 250V
$2,005.45
Excluded Tax
Victron Energy SmartSolar MPPT 250/60-MC4 Controllers: Experience Unmatched Convenience and Efficiency
Victron Energy offers a comprehensive range of Victron Energy SmartSolar MPPT 250/60-MC4 tailored to suit various system configurations. Our SmartSolar MPPT controllers provide exceptional performance and offer unparalleled convenience through remote monitoring and control using the user-friendly VictronConnect app. In addition, with our adaptive battery management feature, you can extend the lifespan of your batteries, ensuring long-term reliability for your solar power system.
Victron understands that every solar system has unique requirements. So whether you have a small-scale 12V or 24V system or you require higher power capacities for 36V or 48V systems, Victron has the perfect MPPT controller for you.
The 75/10 and 75/15 MPPT controllers are ideal for 12V and 24V systems utilizing either low-cost “house panels” or smaller “12V panels.” These controllers can handle up to 3 “12-volt” style panels connected in series, providing efficient power conversion for your setup.
For higher power requirements, the 100V and 150V models are designed to accommodate 12V, 24V, 36V, and 48V systems.
Specifications:
- Brand: Victron Energy
- Model: SmartSolar MPPT 250/60-MC4
- Battery voltage: 12/24/36/48V
- Charge current: 60A
- Nominal PV power:
– 12V: 860W
– 24V: 1720W
– 36V: 2580W
– 48V: 3440W - IP rating IP43
- PV open circuit voltage: 250V
$1,336.95
Excluded Tax
Victron Energy SmartSolar MPPT 250/70-MC4 VE.Can : Experience Unmatched Convenience and Efficiency
Victron offers a comprehensive range of Victron Energy SmartSolar MPPT 250 /70-MC4 VE.Can tailored to suit various system configurations. Our SmartSolar MPPT controllers provide exceptional performance and offer unparalleled convenience through remote monitoring and control using the user-friendly VictronConnect app. In addition, with our adaptive battery management feature, you can extend the lifespan of your batteries, ensuring long-term reliability for your solar power system.
Victron understands that every solar system has unique requirements. So whether you have a small-scale 12V or 24V system or you require higher power capacities for 36V or 48V systems, Victron has the perfect MPPT controller for you.
The 75/10 and 75/15 MPPT controllers are ideal for 12V and 24V systems utilizing either low-cost “house panels” or smaller “12V panels.” These controllers can handle up to 3 “12-volt” style panels connected in series, providing efficient power conversion for your setup.
For higher power requirements, the 100V and 150V models are designed to accommodate 12V, 24V, 36V, and 48V systems.
Specifications:
- Brand: Victron Energy
- Model: SmartSolar MPPT 250/70-MC4 VE. Can
- Battery voltage: 12/24/36/48V
- Charge current: 70A
- Nominal PV power:
– 12V: 1000W
– 24V: 2000W
– 36V: 3000W
– 48V: 4000W - IP rating IP43
$1,644.95
Excluded Tax
